Personal Protective Equipment (PPE) must, above all, ensure the safety of its wearer.
However, effective protection does not mean replacing equipment unnecessarily. Protective clothing, footwear and gloves can remain in use for as long as their condition and the manufacturer's instructions allow.
At FRANCITAL ENVIRONNEMENT, we encourage responsible PPE use: maintain, inspect, repair when authorised and replace when necessary.
This approach combines two essential priorities: protecting users and reducing environmental impacts.
The service life of PPE depends on several factors:
The nature of the materials and product design.
Frequency and intensity of use.
Working and exposure conditions.
Washing, maintenance and storage.
Damage, incidents and material ageing.
Equipment that has rarely been used is not necessarily still suitable for protection. Conversely, regularly used clothing may retain its protective performance if it remains in good condition and complies with the manufacturer's limitations.
The manufacturing date indicates when the product was manufactured. It is not, in itself, an expiry date.
Storage life refers to the period during which equipment can be stored under the conditions specified by the manufacturer.
Service life refers to the period during which equipment remains suitable for its intended protective function, subject to its condition and the limits specified in its user instructions.
Some PPE may also have an expiry date or specific limitations related to ageing or the number of cleaning cycles.
The essential rule: always consult the product's user instructions.
Before each use, check the overall condition of your equipment.
For protective clothing, look for tears, excessive wear, damaged seams, faulty fastenings and unusual deformation.
For footwear, examine the sole, upper, joints and any protective areas.
For gloves, check worn areas, punctures, seams and the condition of the materials.
PPE must be withdrawn from protective use when:
The protective materials are damaged.
Its condition no longer allows the expected protective performance to be assured.
It has been involved in an incident that may have compromised its protection.
The limits specified by the manufacturer have been reached.
Damage cannot be repaired in accordance with the manufacturer's instructions.
If you are unsure about the integrity of any equipment, do not continue using it as PPE.
Dirt, oils, resins and other contaminants can affect the properties of certain materials.
Regular maintenance, carried out in accordance with the user instructions, helps preserve protective performance.
Store equipment clean and dry, under suitable conditions.
Avoid prolonged exposure to moisture, excessive temperatures, chemicals and other damaging factors identified by the manufacturer.
A small tear in the outer fabric does not necessarily mean that the garment must be replaced.
However, repairs should only be carried out when authorised by the manufacturer and when they do not compromise protection.
For forestry chainsaw protective clothing, protective materials must never be stitched, cut, displaced or modified except as expressly authorised.
For protective footwear, maintenance and repair operations must not affect the certified protective properties.
Find our recommendations in the Forestry PPE Care Guide.
Avoiding unnecessary equipment replacement is a responsible approach.
PPE that is still suitable for its protective purpose does not need to be replaced simply because it is old or shows signs of use that do not affect safety.
Conversely, keeping damaged equipment in service to avoid purchasing a replacement would be the wrong decision.
The aim is not to make PPE last at any cost, but to use it for as long as it remains safe.
Good equipment management is based on selecting suitable products, maintaining them regularly and replacing them according to their actual condition and the manufacturer's requirements.
Chainsaw protective clothing, safety footwear or any other PPE that no longer performs its protective function must not be reused as protective equipment.
Care should also be taken to prevent it from being passed on to another person for the same purpose.
Not all PPE can be placed in textile collection bins intended for everyday clothing.
Professional protective equipment may combine several materials: technical textiles, membranes, foams, protective fibres, leather, rubber and metal components.
Recovery and recycling options depend on material composition, condition and available processing facilities.
Before disposing of PPE, contact your employer, waste management provider or a specialist collection scheme for professional equipment.
Clothing and equipment heavily contaminated with oils, fuels, solvents or other hazardous substances may require specific waste management procedures.
They should not be placed in ordinary textile collection systems without prior verification.
Disposal must comply with the requirements applicable to the contaminants concerned.
Multilayer materials and technical assemblies can make recycling difficult.
Depending on the available facilities, some materials may be recovered or recycled, while others must undergo appropriate waste treatment.
Never describe equipment as recyclable without identifying a suitable collection and processing route.
Where their material and condition allow, packaging materials can be sorted according to local requirements.
Cardboard packaging and certain plastic packaging materials can be collected through appropriate recycling systems.
Keep the user instructions throughout the PPE's service life. They contain essential information about maintenance, inspection, limitations and withdrawal from use.
Once the equipment has been permanently withdrawn from service, paper instructions can be placed in the appropriate paper recycling collection system, in accordance with local sorting requirements.
User instructions contain essential information for safe PPE use: do not discard them prematurely.
FRANCITAL ENVIRONNEMENT is committed to reducing the environmental impacts of its activities and products.
This approach includes:
Considering ecodesign from the development stage of new products.
Optimising material consumption during design and manufacturing.
Incorporating recycled fibres whenever technical and protective requirements allow.
Seeking suitable supply solutions, favouring proximity where relevant.
Reusing certain packaging materials and exploring alternatives to reduce consumption.
Making use of textile offcuts for suitable applications whenever possible.
These initiatives do not eliminate the environmental impacts of our activities, but they contribute to our continuous improvement approach.
Our priority remains unchanged: developing effective protective equipment suited to the risks involved, while paying particular attention to its environmental impact.
USE — Choose PPE suited to the risk and correctly fitted.
MAINTAIN — Follow washing, cleaning and storage instructions.
INSPECT — Regularly check the condition and integrity of your equipment.
REPAIR — Only when authorised by the manufacturer and without compromising protection.
REPLACE — As soon as safety can no longer be assured.
SORT — Direct end-of-life equipment to a waste management route suited to its composition and possible contamination.
FRANCITAL ENVIRONNEMENT — Textile expertise dedicated to your protection.
These are general recommendations. The manufacturer's user instructions, product limitations and applicable waste management requirements always take precedence. Collection and recovery options vary according to equipment type, location and available facilities.