FR
EN
DE
ES
PROTECTIVE TROUSERS FOR USERS OF CHAIN SAWS EN ISO 11393-2 type A classe 1 20 m/s. SUMMER TROUSERS DESCRIPTION: Elasticated waistband, hand pockets with reverse zip, cargo pocket with dust flap, tool rings.Varying crotch length 82 cm TECHNICAL FOCUS: "Venturi Effect" breathable zone: 4 points ZONES 1 & 2 Moisture Management Test ZONES 3 & 4 zips...
167,45 € tax incl.
FORESTRY BOOSTER CLASS 2 BOOTS
CHAIN SAW PROTECTIVE FOOTWEAR CLASS 2 Waterproof footwear with anti-perforation sole. COMPOSITION: Chain saw protection: high tenacity pads Toecap protection 4mm polyester anti-perforation midsole Waterproof leather PERWANGER 2.4 mm hydrophobic TEPOR membrane lining. rubber midsole: VIBRAM® TECHNICAL DESCRIPTION: Hydrophobic footwear with...
360,00 € tax incl.
CL1 EVEREST R TROUSERS - Green Impact
ECO DESIGN Protective trousers for chain saw users EN ISO 11393-2:2019 type A classe 1 20 m/s.Protection with SOFLY® Technology Protective trousers for chainsaw users, suitable for pruning work. Product resulting from an eco-design approach with regenerated nylon fibres, Free Fluor water-repellent finish, unbleached linings (no dyes, saving water and...
177,82 € tax incl.
GAITERS CORDURA® Fabric coated with polyamide High Tenacity with side zipHook to fasten to trousers and clamping system/hooking under shoes
71,23 € tax incl.
CHAIN SAW PROTECTIVE FOOTWEAR CLASS 3 Waterproof footwear with anti-perforation sole. COMPOSITION: Chain saw protection: high tenacity pads Toecap protection 4mm polyester anti-perforation midsole Waterproof leather PERWANGER 2.4 mm hydrophobic TEPOR membrane lining. rubber midsole: VIBRAM® TECHNICAL DESCRIPTION: Hydrophobic footwear with...
360,00 € tax incl.
PROTECTIVE TROUSERS FOR USERS OF CHAIN SAWSEN ISO 11393-2:2019 type A classe 3 28 m/s. o9-layer SOFLY® Technology chain saw protection system. DESCRIPTION: 2 fine sewing pockets. 1 ruler pocket with plug spanner pocket.Semi-elasticated waist with loops and dorsal bib. Crotch tip two-way stretch for more comfort and endurance. Crotch length of 82 cm
126,36 € tax incl.
PROTECTIVE LEGGINGS FOR USERS OF CHAIN SAWS EN ISO 11393-2 Type A class 3 28 m/. o9-layer SOFLY® Technology chain saw protection system. Thigh measurement = 70 cm (for a larger version, add legging expander AC007 + 50 mm) Use of range:OCCASIONAL use DESCRIPTION: Elasticated waistband in florescent yellow with plastic loops.Opening along the length of the...
120,00 € tax incl.
COMPLETE FORESTRY HELMET DESCRIPTION Polyethylene shell, 4-point cap Visor support, steel shield 40X19 cm Ear protection muffs SNR 25dB 2-point jugular Neck protector Boxed
45,60 € tax incl.
Protective leggings for chain saw users EN ISO 11383-2 Type A class 1 20 m/s. Extender available 50 mm = AC007 o chain saw protective Material : 70% polyester 30% Polypropylène o Weight < 1,100 KG Thigh measurement = 70 cm Range of applications:OCCASIONAL use DESCRIPTION: Elasticated waistband in florescent yellow with plastic loops.Opening along the...
72,61 € tax incl.
PROTECTIVE GAITERS against risks from CHAIN SAW cuts CLASS 1 Adjustable straps For occasional use.Use with a safety footwear EN 20345 from 38 to 46
81,60 € tax incl.
WOODCUTTER GLOVES PROTECTIVE GLOVES FOR MECHANICAL RISKS STANDARDS: EN ISO 21420:2020 and EN 388:2016+A1:2018
15,18 € tax incl.
Personal protective equipment (PPE)
While no PPE can provide 100% protection against cuts from chainsaws, when climbing, chainsaw users should wear the following:
- A safety helmet (the Arboriculture and Forestry Advisory Group (AFAG) recommends a mountaineeringstyle helmet complying with BS EN 12492, climbing helmet).
- Eye protection (complying with either BS EN 1731 or BS EN 166).
- Hearing protection (complying with BS EN 352).
- Suitable gloves appropriate to the task and subject to the operator’s risk assessment.
- Leg protection and groin protection (complying with BS EN 381-5). AFAG recommends Type C leg protection for aerial work, because of the high allround chainsaw cut protection. However, where wearing Type C is impractical (eg because of the higher risk of heat stress associated with it), it may be appropriate to use Type A, where justified by risk assessment.
- Protective boots with good grip and protective guarding at front vamp and instep (complying with BS EN ISO 20345).
- Non-snag outer clothing. The use of high-visibility clothing may also be appropriate. As a minimum, each person should carry a personal first-aid kit, incorporating a large wound dressing, barrier gloves, plasters and whistle (see INDG214 First aid at work: Your questions answered). Hand-cleaning material such as waterless skin cleanser or soap, water and paper towels should be readily available.
Standard RIS-3279-TOM
In December 2016, the Standard RIS-3279-TOM replaced the Standard GO/RT 3279. The standard from the British Rail Integration System (RIS) defines the minimum specification for high visibility clothing in the railway industry. Among other things, this standard stipulates that the clothes must be HV orange and has stricter colorimetric requirements than the harmonised Standard EN ISO 20471. All HV clothing by FRANCITAL meet the requirements of this standard.
