Chain saw cut resistant clothingThere are 49 products.

CLASS 1 Trouser

Protective trousers, leggings and overalls for users of hand-held chainsaws: Protective trousers, leggings and overalls against the risk of chainsaw cuts, known as "anti-cut". Trousers, leggings and dungarees comply with the harmonised standard EN ISO 11393-2 type A, B or type C class 1.

Performance level: class 1 = chain speed of 20 m/s

Type A: protective mattress positioned on the front of the leg

Type C: protective mattress positioned around the leg, at 360°.

Type C Comprehensive Protection is particularly designed for people who do not usually work with chainsaws, or in exceptional situations.

CLASS 2 Trouser

Protective trousers, leggings and overalls for users of hand-held chainsaws: Protective trousers, leggings and overalls against the risk of chainsaw cuts, known as "anti-cut". Trousers, leggings and dungarees comply with the harmonised standard EN ISO 11393-2class 2.

Performance level: class 2 = chain speed of 24 m/s

Type A: protective mattress positioned on the front of the leg

Type C: protective mattress positioned around the leg, at 360°.

Type C Comprehensive Protection is particularly designed for people who do not usually work with chainsaws, or in exceptional situations.

CLASS 3 Trouser

Protective trousers, leggings and overalls for users of hand-held chainsaws: Protective trousers, leggings and overalls against the risk of chainsaw cuts, known as "anti-cut". Trousers, leggings and dungarees comply with the harmonised standard EN 381-5 type A or type C class 3.

Performance level: class 3 = chain speed of 28 m/s

Design A: protective mattress on the front of the leg.

TYPE B

CHAPS with chainsaw cut resistance material

TYPE C

Total protection pants "type C": protective mattress wrapping the leg at 360°.

CLASS 1 Jacket

Protective jackets against the risk of cuts by handheld chainsaw: protection on the shoulders, forearm and chest.

Class 1 jackets = chain speed of 20 m/s

Gaitors

Protective gaiters against the risk of injury following cuts with a chainsaw.

Gaiters EN ISO 11393-5 class 1 20 m/s

Cuffs

Protective sleeves against the risk of injury from hand-held chainsaw cuts. These sleeves cover the forearm and offer an interesting protection instead of the jacket when it is not adapted to the work performed.

The cut-resistant sleeves are particularly suitable for pruning work.

These cuffs are certified "to say expert" according to certain specifications of standard EN 381-11. This is a certification procedure set up by an independent notified body when there are no European standards available. The "expert" certification corresponds to the creation of technical standards adapted to innovative products.

  • PROTECTIVE TROUSERS FOR USERS OF CHAIN SAWS EN ISO 11393-2 type A classe 1 20 m/s. SUMMER TROUSERS DESCRIPTION: Elasticated waistband, hand pockets with reverse zip, cargo pocket with dust flap, tool rings.Varying crotch length 82 cm TECHNICAL FOCUS: "Venturi Effect" breathable zone: 4 points ZONES 1 & 2 Moisture Management Test ZONES 3 & 4 zips...

    167,45 € tax incl.

  • CHAPS PRIOR EN 11393-2 TYPE B CLASS 1 20m/s For occasional use, easy to use. Size 1 : XS to L Size 2 : XL to 4XL Choice of type A, type B or type C Type A is, for example, intended to be used for ordinary forestry work byprofessional loggers who have been fully trained and instructed. Type B is intended to be used for occasional work with chainsaws. Type...

    80,40 € tax incl.

  • CHAPS PRIOR HV EN 11393-2 TYPE B CLASS 1 20m/s EN ISO 20471 For occasional use, easy to use. Size 1 : XS to L Size 2 : XL to 4XL Choice of type A, type B or type C Type A is, for example, intended to be used for ordinary forestry work byprofessional loggers who have been fully trained and instructed. Type B is intended to be used for occasional work with...

    114,00 € tax incl.

  • PROTECTIVE SLEEVES FOR USERS OF CHAIN SAWS CHAINSAW TEST SPEED = 28 m/s Class 3 Chainsaw protective material in SOFLY® technology. Range of applications: Essentially Trimming/ Climbing Can also be used when shredding vegetation to protect the upper-arms. o DESCRIPTION: Black Elastan mesh cuff with protective padding for scrapes on the back of the...

    60,24 € tax incl.

  • PROTECTIVE SLEEVES FOR USERS OF CHAIN SAWS CHAINSAW SPEED TES : 20 m/s (Cl1) chain saw protection in SOFLY® technology. Range of applications: Essentially Trimming Can also be used when shredding vegetation to protect the upper-arms. o DESCRIPTION: Black Elastan mesh cuff with protective padding for scrapes on the back of the hand.Elastic fastener behind...

    39,00 € tax incl.

  • SIZE 1 : XS - S SIZE 2 : M - L SIZE 3 : XL - 2XL SIZE 4 : 3XL - 4XL

    12,00 € tax incl.

  • PROTECTIVE TROUSERS FOR USERS OF CHAIN SAWS & SIGNALLING SYSTEM WITH HIGH VISIBILITY FOR PROFESSIONAL USE TYPE C = 360° TOTAL PROTECTION STANDARDS: o EN ISO 11393-2 TYPE C classe 1 20 m/so EN ISO 20471 :2013 classe 2o EN ISO 13688 o ORANGE HI VIZ ONLY : Rail Industry Standard RIS-3279-TOM (2016) DESCRIPTION: 360° cut resistant protection 2 hand...

    187,93 € tax incl.