HV BRUSHCUTTING VISTARTROUSERS

  • PANT RIGA DEBROUSSAILLAGE HV
  • PANT RIGA DEBROUSSAILLAGE HV

150,00 € tax incl.

Référence : FI112

TECHNICAL DESCRIPTION

Trousers providing protection against small flying debris.

  • EN ISO 13688:2013 – Protective clothing – General requirements

  • EN ISO 20471+A1:2016 Class 2 – High-visibility warning clothing

  • Rail Industry Standard: RIS-3279-TOM (2016) – Orange only

These brushcutting trousers feature front reinforcements and include impact-absorbing foam protection against possible non-violent projections of stones, soil or branches that may occur during brushcutting operations. Easy to clean.

FEATURES

  • Removable reinforcement with 5 mm foam at shin and knee level

  • VENTURI effect ventilation: lightweight breathable mesh at lower back, behind the knees and 4 rear ventilation zips

  • 2 zipped hand pockets

  • 1 zipped pocket on left thigh

  • Elasticated waistband

  • Wrap-around back bib

  • Zipped back pocket






COMPOSITION

  • Fabric – 240 g/m² water-repellent and stain-resistant (non-fluorinated hydrophobic finish), double-face construction:
    70% polyester on the outer face for mechanical resistance and 30% cotton on the inner face for comfort.

Mechanical properties:

  • Abrasion resistance EN ISO 12947-2:1999: 80,000 cycles

  • Tear resistance EN ISO 13937:2000: 40 N in warp and weft

  • Tensile strength: 1250 N (warp) and 1100 N (weft)

  • Lower leg reinforcement in high-tenacity polyamide 6.6 fabric – 245 g/m²

  • Hip and waistband fabric 260 g/m²: 94% Polyamide, 6% Elastane

  • 70 mm retro-reflective tape

PROTECTION PERFORMANCE

High-density polyethylene foam reinforcement (density 30 kg/m³), thickness 5 mm at knees and shins:

  • EN 13595-4:2002 – Impact cut resistance: Level 2 (≤ 25 mm)

  • EN 863 – Puncture resistance >150 N

  • Determination of impact force transmission according to EN 14021:2003 (off-road motorcycling stone guard standard): result < 27 kN

Data sheet
PropertiesReinforcements: high density foam
Standard #1EN 20471
ClassClass 2
Weight in Kg (M - 42 / TU / Gloves 10 / Footwear 42)0,600 Kg
Product typeTrousers

These products may also interest you

  • BRUSHCUTTING TROUSERS Protection against minimal risks due to surface mechanical stress These brushcutting trousers offer polyamide supports at the front and benefit from an impact-absorbing foam that protects against possible non-violent impacts from pebbles, earth or parts of branches, which may occur during brushcutting operations. Easy clean....

    57,18 € tax incl.

  • Replacement parts: 4 pieces of elastic (2 short and 2 long)Elastic compatible with rigid shin protectors for brushcutting AC004.

    9,40 € tax incl.

  • Protection against small, non-violent splashes during brushcutting operations.  SCOPE: This equipment is designed to protect the shins of a user of a rotofil or backpack or push brushcutter against any non-violent projections of stones, earth or branch particles that may occur during brushcutting operations. Rubber tie for adjustment.Inside foam...

    47,82 € tax incl.

  • Harness developed to support a brushcutter DESCRIPTION: Adjustable straps. Foam supports. Universal quick coupler. Central fastener 4 straps.

    35,24 € tax incl.